Shipping Service:

Priority delivery,fast ship out within 48 hours.

Detailed Product Description

1. Light source: CREE XHP70.2 2. Brightness: 4000LM 3. Lighting color: white / yellow 4. USE Batteries: 2*26650 Batteries. 5. Diving depth: 60M 6. Switch type: independent key switch. 7. Product net weight: 395g

Product Description:

1. This flashlight is amphibious and has intelligent temperature control function 2. Use 100% brightness on land for 3-5 minutes, the temperature will rise to 65-70 degrees, and automatically reduce to 60% brightness after 5 minutes. 3. Applicable environment: regular carrying, caving, camping, teaching, patrol, diving, hunting, hiking, searching, self-defense, night fishing, night cycling It is recommended to reduce the brightness position to less than 50% in land use.

Package Includes:

Please See The Picture Package.

Suggest Buy Gift Box Set:

1.More than 95% of purchasers will choose a gift box containing battery and charger. 2.You can keep the flashlight well, or as a gift to friends and family. （Ask customer service for gift box price, customer service will change the price）

Warm Tips

First, instructions for use 1. Check the battery: Make sure the battery is charged and put it into the flashlight in the correct direction; 2. When the flashlight is in use, it should be selected according to the voltage and battery requirements of the flashlight. It should not be used indiscriminately to prevent the circuit board from being burnt out. Different types of batteries with different voltages should not be used at the same time; 3. For batteries that are not used for a long time, the battery should be filled and kept, and then charged and discharged once every three months to avoid chemical corrosion. 4. The inner wall of the lamp cup is kept clean. Never wipe it with your hand or a hard object. Clear the fingerprint on the lens and wipe it gently with a cotton swab and lens cleaner. 5. Do not touch the flashlight with chemicals and corrosive gases for a long time to avoid damage to the flashlight; 6. Non-professionals should not disassemble the flashlight to prevent damage to the circuit board.

Flashlight Maintenance:

- Please immerse the dive flashlight in the fresh water for few minutes after diving and clean the water after immersing. - Please put lubricant on the switch threads after diving. - Please don't drop or place your dive flashlight in sand, in case the sand go into the switch and threads. - Please inspect the O - rings often, change a one once there is any damage. - Please clean the conductive connections often to ensure the flashlight work normally. FAQ and Detection: When the flashlight flash unusually or can't turn on, it might be the reasons below: - The battery voltage is too low, please replace batteries. - The threads or conductive connections parts are dirty, please clean them with alcohol.